Safety Glass

Safety Glass Cut to Size Birmingham

To comply with building regulations, there are strict rules about when safety glass needs to be fitted in doors, windows & other glazing locations.

Toughened Glass & Laminated Glass in Birmingham

Looking for cut to size mirrors near you? Shard End Glass offer a wide range of mirror types to residential and commercial customers across Birmingham, Sutton Coldfield, Erdington and the Midlands.

What is Safety Glass?

  • There are two types of safety glass: toughened glass & laminated glass (we supply & fit both).
  • Toughened glass, also known as tempered glass, is up to 5 times stronger than regular glass. It is specially treated, so that it will break into small, blunt pieces if it shatters.
  • Laminated glass has a plastic layer in between two layers of glass.The pvb plastic layer is a tough resin, and holds the shards in place if the glass should break. This means it’s great where any level of security is required as, even if the glass breaks, it is still very difficult to gain entry.
  • Read on to see where safety glass needs to be used & some common applications.
made to measure mirrors for commercial properties | Birmingham

Types of Safety Glass

How To Check Safety Glass Type

  • To check whether you have laminated or toughened glass, look for a printed kitemark in the corner of the glass.
  • BS EN 14449: laminated glass
  • BS EN 1250: toughend glass
  • Opaque wired glass is NOT safety glass

Toughened Glass Solutions

  • Worktops & table tops
  • Shower Screens
  • Any window or door where security is important.
  • Splashbacks (behind kitchen hobs)
  • Internal partition walls
  • Balustrades
  • Glass Floors

Laminated Glass Solutions

  • Shop Fronts
  • Doors – internal & external
  • Shelving
  • Partition walls
  • Shower creens
  • Security glass
  • Skylights & roof glazing

Safety Glass: Building Regulations / Critical Locations

To protect people from injury, and to comply with the Building Regulations glazing requirements, there must be safety glass or safety guards in place to protect people from injury. These are also referred to as “Critical Locations.”

The most likely locations for accidents caused by glass breakage, which could result in injuries to a person are in low windos, doors, door side panels, low and low level glass in walls and glass partitions.

Safety glass should be fitted in all doors and other windows or glazed areas that are lower than 800mm from the floor level.

Glass panels less than 250mm wide can be fitted with 6mm glass or laminated glass instead of toughened glass.

Safety Glass: Building Regulations

FAQs

Do I Need to Install Safety Glass?

Safety glass is a legal requirement if used in low level glazing or glazing in and around doors. The specific requirements are for any area where any part of the glass is below 800mm from floor level or, in the case of doors (or within 300mm of a door), any area where any part of the glass is below 1500mm from floor level. Any glazing meeting this criteria will need to be safety glass by law.

Customer Reviews

Opening Hours

Monday –  8:00 am – 5:00 pm
Tuesday –  8:00 am – 5:00 pm
Wednesday – 8:00 am – 5:00 pm
Thursday – 8:00 am – 5:00 pm
Friday – 8:00 am – 5:00 pm
Saturday – CLOSED
Sunday – CLOSED